VMC 4020

12.1″ XGA TFT LCD monitor with 5-wire resistive touch, Built-in Intel Atom® x7-E3950 processor, 1.6GHz, Aluminum die-casting and fanless design, Analog camera x 3 (CVBS), Ether of completer IP65 housing, or IP65 housing without I/O part, Automatic/manual brightness control, Isolated CANBus 2.0 x 2, 10/100/1000Mhz for independent ethernet x 2, On screen F1 ~ F10 programmable function keys, Military standard for vibration and shock, UPS Battery & PoE 802.3af/at (optional), iButton and RFID for ID identification, Micro SIM x 2, Wide range DC input from 9V ~ 60V DC in, Sunlight readable capability: 1,200nits LCD brightness, One expansion port reserved, Operating system: Windows and Linux, CE/FCC/EMark

Download PDF

    Get a Quote



    Customer Details









    Specifications

    Storage Temp

    Storage temperatures: -30°C to 70°C

    Storage

    1 x CFast
    1 x 2.5" SATA SSD bay

    SKU

    VMC 4020

    Touch Technology

    5-wire resistant touch
    Anti-glare coating surface
    Transmission rate: 81 ± 3%

    Warranty

    Graphics

    Input Voltage

    9V ~ 60V DC in (UPS: 12V, 24V, 36V and 48V)
    Reverse protection/over voltage protection/under voltage protection
    Ignition On/O control & programmable On/O delay timing
    Wake up by LAN1, SMS, RTC and ignition

    LAN Controller

    1 x 10/100/1000, LAN1 (wake up on LAN)
    1 x 10/100/1000, LAN2 (optional for PoE 802.3af/at)
    2 x Antenna for Wi-Fi

    Memory Capacity

    4GB (default)

    Memory Slots

    1 x SODIMM

    Memory Speed

    1600MHz

    Memory Type

    DDR3L

    Mounting Options

    VESA 75

    Operating Temp

    Ambient with air -30°C to 60°C

    Power Interface

    1 x M12 (5-pin) (VMC 4020-4A1,)
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)
    1 x 3-pin terminal block((VMC 4020-4A0,)
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)

    Processor

    Intel Atom® x7-E3950 processor dual core 1.6GHz memory

    Processor Generation

    Apollo Lake

    Processor Socket Type

    onboard

    Rear I/O

    I/O Interface-Lateral
    Right Side:
    1 x CFast card slot
    1 x System reset button
    1 x USB 2.0 host type A connector
    Left Side:
    1 x Antenna for WWAN

    I/O Interface-Bottom (VMC 4020-4A1, IP65)
    1 x M12 (22 pins)
    -- 1 x 10/100/1000, LAN1 (wake up on LAN)
    -- 1 x RS232 (Tx/Rx)/RS422/RS485 (RI, 5V/0.5A, 12V/0.5A)
    -- 1 x DR (odometer + speed)
    -- 2 x GPI
    Source: 9V ~ 60V-in (default)
    Sink: external 0V ~ 60VDC pull-high selected by software settings
    Input High "1" Voltage: 3.3 ~ 60 VDC
    Input Low "0" Voltage: 0 ~ 2 VDC
    -- 2 x GPO
    Source: 9V ~ 60V-in (default)
    12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
    Sink: external max. 0.5A pull high
    1 x M12 (21-pin)
    -- 1 x Mic-in
    -- 1 x Line-out
    -- 1 x Full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
    -- 2 x Isolated CANBus 2.0B
    When installing CAN06, CAN2 becomes J1939/ISO15675-4
    When installing CAN05, CAN2 becomes J1708
    -- 1 x iButton
    1 x M12 (5-pin)
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)
    1 x M12 (8-pin)
    -- Either of DC output or RFID
    1 x DC output (12V/2A )
    1 x RFID (Tx/Rx, 12V/2A)
    1 x M12 (8-pin)
    -- 1 x 10/100/1000, LAN2 (optional for 802.3af/at)
    1 x M12 (8-pin)
    -- 2 x USB type A
    1 x M12 (18-pin)
    -- Expansion port
    1 x GPS antenna SMA connector (on housing)

    I/O Interface-Bottom (VMC 4020-4A0, Front IP65)
    1 x Mic-in and Line-out
    2 x RJ45 10/100/1000
    -- LAN1, wake up on LAN
    -- LAN2, optional for 802.3at
    1 x USB type A
    1 x DB9 full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
    1 x 26 pins connector:
    -- 1 x Full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
    -- 1 x RFID ( Tx/Rx )
    -- 2 x Isolated CAN 2.0B
    -- 1 x J1939/ISO15765-4 or J1708 (CAN05 or CAN06)
    When installing CAN06, CAN2 becomes J1939/ISO15675-4
    When installing CAN05, CAN2 becomes J1708
    -- 1 x DR (odometer + speed)
    -- 1 x iButton
    -- 1 x GPI:
    Source: 9V ~ 60V-in (default)
    Sink: external 0V ~ 60DC pull-high selected by software settings
    Input High "1" Voltage: 3.3 ~ 60 VDC
    Input Low "0" Voltage: 0 ~ 2 VDC
    -- 2 x GPO
    Source: 9V ~ 60V-in (default)
    12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
    Sink:external external max. 0.5A pull high
    1 x DB15 for expansion port
    1 x 3-pin terminal block
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)

    I/O Interface-Top
    2 x Antenna for Wi-Fi

    Accessories

    Certifications

    CE/FCC class B/E13

    Contrast Ratio

    750:1 (typical)

    Dimensions

    339.97mm(W) x 261.97mm(H) x 75.10mm(D)

    Display Brightness

    1200 nits (typical)

    Display Resolution

    1024 x 768 pixels (XGA)

    Display Size

    12.1"

    Expansion

    3 x Full-size mini-PCIe socket (PCIe + USB)
    1 x Full-size mini-PCIe socket (USB)
    1 x CFast
    2x Micro SIM slot