VMC 3021

VMC 3021 View Larger Image

10.4″ XGA TFT LCD monitor with 5-wire resistive touch, Built-in Intel Atom® x7-E3950 processor, 1.6GHz, Aluminum die-casting and fanless design, Analog camera x 3 (CVBS), Complete IP65 housing, Automatic/manual brightness control, Isolated CANBus 2.0 x 2, 10/100/1000Mhz for independent ethernet x 2, On screen F1 ~ F10 programmable function keys, Military standard for vibration and shock, UPS Battery & PoE 802.3af/at (optional), iButton and RFID for ID identification, Micro SIM x 2, Wide range DC input from 9V ~ 60V DC in, Sunlight readable capability: 1,200nits LCD brightness, One expansion port reserved, Operating system: Windows and Linux, CE/FCC/EMark

Download PDF

    Get a Quote

    Customer Details








    Specifications

    Storage Temp

    Storage temperatures: -30°C to 70°C

    Storage

    1 x CFast
    1 x 2.5" SATA SSD bay

    SKU

    VMC 3021

    Touch Technology

    5-wire resistant touch
    Anti-glare coating surface
    Transmission rate: 81 ± 3%

    Warranty

    Graphics

    Input Voltage

    9V ~ 60V DC in (UPS: 12V, 24V, 36V and 48V)
    Reverse protection/over voltage protection/under voltage protection
    Ignition On/O control & programmable On/O delay timing
    Wake up by LAN1, SMS, RTC and ignition

    LAN Controller

    1 x 10/100/1000, LAN1 (wake up on LAN)
    1 x 10/100/1000, LAN2 (optional for PoE 802.3af/at)
    2 x Antenna for Wi-Fi

    Memory Capacity

    4GB (default)

    Memory Slots

    1 x SODIMM

    Memory Speed

    1600MHz

    Memory Type

    DDR3L

    Mounting Options

    VESA 75

    Operating Temp

    Ambient with air -30°C to 60°C

    Power Interface

    1 x M12 (5-pin)
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)

    Processor

    Intel Atom® x5-E3950 processor dual core 1.8GHz

    Processor Generation

    Apollo Lake

    Processor Socket Type

    onboard

    Rear I/O

    I/O Interface-Front:
    LCD back light on/off
    Volume control (+/-)
    Brightness control (+/-)
    Light sensor
    4 x LED indicators (power/battery charging, WLAN, shift, storage)
    F1 ~ F10 programmable function
    2 x Built-in 2W speakers

    I/O Interface-Lateral:
    Right Side
    -- 1 x CFast card slot
    -- 1 x System reset button
    -- 1 x USB 2.0 host type A connector
    Left Side
    -- 1 x Antenna for WWAN

    I/O Interface-Bottom:
    1 x M12 (22-pin)
    -- 1 x 10/100/1000, LAN1 (wake up on LAN)
    -- 1 x RS232 (Tx/Rx)/RS422/RS485 (RI, 5V/0.5A, 12V/0.5A)
    -- 1 x DR (odometer + speed )
    -- 2 x GPI
    Source: 9V ~ 60V-in (default)
    Sink: external 0V ~ 60VDC pull-high selected by software settings
    Input High "1" Voltage: 3.3 ~ 60 VDC
    Input Low "0" Voltage: 0 ~ 2 VDC
    -- 2 x GPO
    Source: 9V ~ 60V-in (default)
    12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
    Sink: external max. 0.5A pull high
    1 x M12 (21-pin)
    -- 1 x Mic-in
    -- 1 x Line-out
    -- 1 x full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
    -- 2 x Isolated CANBus 2.0B
    When installing CAN06, CAN2 becomes J1939/ISO15675-4
    -- When installing CAN05, CAN2 becomes J1708
    -- 1 x iButton
    1 x M12 (5-pin)
    -- 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)
    1 x M12 (8-pin)
    -- Either of DC output or RFID
    1 x DC output (12V/2A )
    1 x RFID (Tx/Rx, 12V/2A)
    1 x M12 (8-pin)
    -- 1 x 10/100/1000, LAN2 (optional for PoE 802.3af/at)
    1 x M12 (8-pin)
    -- 2 x USB type A
    1 x M12 (18-pin)
    -- Expansion port
    1 x GPS antenna SMA connector (on housing)

    I/O Interface-Top:
    2 x Antenna for Wi-Fi

    Accessories

    Certifications

    CE/FCC class B/E13

    Contrast Ratio

    500:1 (typical)

    Dimensions

    289.98mm (W) x 229.97mm (H) x 68.70mm (D)

    Display Brightness

    1200 nits (typical)

    Display Resolution

    1024 x 768 pixels (XGA)

    Display Size

    10.4"

    Expansion

    3 x Full-size mini-PCIe socket (PCIe + USB)
    1 x Full-size mini-PCIe socket (USB)
    1 x CFast
    2 x Micro SIM slot