VMC 3020

VMC 3020 View Larger Image

10.4″ XGA TFT LCD monitor with 5-wire resistive touch, Aluminum die-casting and fanless design, Built-in Intel Atom® x5-E3930 processor, 1.8GHz, Automatic/manual brightness control, Touch with heater supported, On screen F1 ~ F10 programmable function keys, Powered USB and COM (5V/12V, 1.5A) for accessories, Military standard for vibration and shock, UPS Battery supported, iButton and RFID for ID identification, Wide range DC input from 9V~60V DC in, Sunlight readable capability: 1,200nits LCD brightness, Operating system: Windows and Linux, CE/FCC/EMark

Download PDF

    Get a Quote

    Customer Details








    Specifications

    Storage Temp

    Storage temperatures: -30°C to 70°C

    Storage

    1 x CFast
    1 x 2.5" SATA SSD bay

    SKU

    VMC 3020

    Touch Technology

    5-wire resistant touch
    Anti-glare coating surface
    Transmission rate: 81 ± 3%

    Warranty

    Graphics

    Input Voltage

    9V~60V DC in (UPS: 12V, 24V, 36V and 48V)
    Reverse protection/over voltage protection/under voltage protection
    Ignition On/Off control & programmable On/Off delay timing
    Wake up by SMS, RTC and ignition

    LAN Controller

    1 x RJ45 for Giga LAN
    2 x Antenna for Wi-Fi

    Memory Capacity

    4GB (default)

    Memory Slots

    1 x SODIMM

    Memory Speed

    1600MHz

    Memory Type

    DDR3L

    Mounting Options

    VESA 75/100 & desktop mounting

    Operating Temp

    Ambient with air -30°C to 60°C

    Power Interface

    Lockable power connector (power, ignition, ground)

    Processor

    Intel Atom® x5-E3930 processor dual core 1.8GHz

    Processor Generation

    Apollo Lake

    Processor Socket Type

    onboard

    Rear I/O

    I/O Interface-Front:
    5 x On screen display buttons
    Power on/off
    Volume control (+/-)
    Brightness control (+/-)
    Light sensor
    4 x LED indicators (power/battery charging, WLAN, shift, storage)
    F1 ~ F10 programmable function keys
    2 x Built-in 2W speakers

    I/O Interface-Lateral:
    Right Side:
    1 x CFast card slot
    System reset button
    USB 2.0 host type A connector
    Left Side:
    1 x antenna for WWAN

    I/O Interface-Bottom:
    1 x Power switch (ATX mode)
    Lockable power connector (power, ignition, ground)
    2 x RS232 (full signals, RI, 0V, 5V/1.5A, 12V/1.5A)
    1 x RJ45 for Giga LAN
    1 x DB15
    1 x Isolated CAN 2.0B
    -- 1 x iButton
    -- 1 x RFID (12V/1A. 5V/1A, 4-pin)
    -- 1 x Optional RS232 Tx/Rx (share with GPS UART)
    -- 2 x GPI
    Sink type: 5VDC TTL (default)
    Source type: 3 ~ 28VDC
    -- 2 x GPO
    Sink type: 5VDC TTL (default), max current: 20mA
    Source type: 3 ~ 28VDC, max current: 150mA
    1 x Powered USB (5V/1.5A, 12V/1.5A)
    1 x USB type A (5V/1A)
    1 x Mic-in, 1 x Line-out
    1 x Antenna for GPS

    I/O Interface-Top:
    2 x Antenna for Wi-Fi

    Accessories

    Certifications

    CE/FCC class B/E13

    Contrast Ratio

    500:1 (typical)

    Dimensions

    289.98mm (W) x 229.97mm (H) x 68.70mm (D)

    Display Brightness

    1200 nits (typical)

    Display Resolution

    1024 x 768 pixels (XGA)

    Display Size

    10.4"

    Expansion

    1 x Half-size mini-PCIe socket (PCIe + USB) for WLAN option
    1 x Full-size mini-PCIe socket (USB) x 1 for WWAN option
    1 x M.2 key-E (PCIe + SDIO + UART + USB) for WLAN option
    1 x SIM slot