VTC 1020

Compact and fanless design, Built-in GPS receiver with optional dead reckoning function, Variety of wireless communication options, Built-in CAN bus 2.0B (BOM option SAE J1939), Wide range DC input from 9~36V, Smart power management with Ignition on/off delay via software control and low voltage protection, Certified by CE/FCC/E13 mark, 5 x RS232 and 2 x RS485

Download PDF

    Get a Quote



    Customer Details









    Specifications

    Accessories

    Rechargeable battery, Lithium-ion, capacity 1100mAh (Optional)

    Certifications

    CE approval, FCC Class A, E13 mark

    Dimensions

    185mm (W) x 120mm (D) x 45mm (H) (7.3" x 4.7" x 1.8")

    Expansion

    1 x mini-PCIe socket (USB)
    1 x mini-PCIe socket (PCIe + USB + mSATA)

    Front I/O

    1 x Power button
    4 x LED indicators for Status (programmable), Storage, WLAN and WWAN
    1 x System reset button
    2 x Type A USB 3.0 compliant host, supporting system boot up
    1 x DB-15 VGA
    1 x HDMI
    1 x SIM card socket

    Graphics

    1 x DB-15 VGA
    1 x HDMI

    Input Voltage

    9~36VDC input

    LAN Controller

    1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet

    Memory Capacity

    up to 8GB, default 4GB

    Memory Slots

    1 x 204-Pin SO-DMIM

    Memory Speed

    1866MHz

    Memory Type

    DDR3L

    Mounting Options

    Operating Temp

    Operating Temperature: -40deg;C to 70°C (w/ industrial SSD) with air flow

    Power Interface

    1 x 9~36VDC input with Ignition and 20W typical power consumption
    1 x 12V/2A DC output, SMBus, power button

    Processor

    Intel Atom® x5-E3930 processor dual core 1.3GHz

    Processor Generation

    Apollo Lake

    Rear I/O

    1 x 9~36VDC input with Ignition and 20W typical power consumption
    1 x 12V/2A DC output, SMBus, power button
    1 x RJ45 with LEDs for 10/100/1000Mbps Ethernet
    1 x Audio-in, 1 x Audio-out
    1 x DB9 COM port for 4 x RS232 Tx/Rx and 2 x RS485
    1 x DB15 for multi port
    -- 1 x CAN 2.0 (BOM option SAE J1939)
    -- 1 x RS232 Tx/Rx
    -- 1 x odometer and direction for optional DR
    -- 5 x programmable DIO
    Input voltage (internal type): 5VDC TTL (default)
    Input voltage (source type): 3~24VDC
    Digital output (sink type): 5VDC TTL (default), max current: 20mA
    Digital output (source type): 3~24VDC

    3 x Antenna hole for SMA-type antenna (WWAN/WLAN/GPS)

    SKU

    VTC 1020

    Storage

    1 x 2.5" SSD SATA 3.0
    1 x mSATA